Flowmeter LC
Connection Size 3″ :
Types :
TYPE M15
(Capacity : 760 L/Min ( 200 GPM )
TYPE M25
TYPE M25
(Capacity : 1135 L/Min ( 300 GPM )
TYPE M30
TYPE M30
(Capacity : 1325 L/Min ( 350 GPM )
Spesification :
Accuracy : ± 0.2%
Repeatability :≤ 0.05 %
Standar Measurement : Unit Liter / US Gallon / imperial Gallon
Max Working Temperature :(-40° C to 71°C)
Meter Body : Aluminium , Cast iron , Steel
Connections : ANSI Flanged , NPT , BSPT , Slip Woled Available
Max.Pressure : 10.5Bar/150 PSI
Type : Direct Reading
Repeatability :≤ 0.05 %
Standar Measurement : Unit Liter / US Gallon / imperial Gallon
Max Working Temperature :(-40° C to 71°C)
Meter Body : Aluminium , Cast iron , Steel
Connections : ANSI Flanged , NPT , BSPT , Slip Woled Available
Max.Pressure : 10.5Bar/150 PSI
Type : Direct Reading
Accuracy/Performance
Repeatability : Capable of 0.02% or better at any flow rate over entire range
Repeatability : Capable of 0.02% or better at any flow rate over entire range
Linearity :
Over 5:1 range
Mech. registration: capable of ± 0.125% or better from max. nom. flow rate
Elect. registration: capable of ±0.10% or better from max. nom. flow rate
Over 10:1 range
Mech. registration: capable of ±0.22% or better from max. nom. flow rate
Elect. registration: capable of ± 0.10% or better from max. nom. flow rate
Over 40:1 range
Mech. registration: capable of ±0.5% or better from max. nom. flow rate
Elect. registration: capable of ±0.15% or better from max. nom. flow rate
Temperature range :
Mech. registration: capable of ± 0.125% or better from max. nom. flow rate
Elect. registration: capable of ±0.10% or better from max. nom. flow rate
Over 10:1 range
Mech. registration: capable of ±0.22% or better from max. nom. flow rate
Elect. registration: capable of ± 0.10% or better from max. nom. flow rate
Over 40:1 range
Mech. registration: capable of ±0.5% or better from max. nom. flow rate
Elect. registration: capable of ±0.15% or better from max. nom. flow rate
Temperature range :
-40° F to 160° F (-40° C to 71° C)
*Stated accuracy obtainable when all variables remain constant. Reading/measurements
reflect a minimum of one minute of flow at selected rate(s). All accuracy statements
based on metering safety solvent (aliphatic hydrocarbon), approximate viscosity 1 CPS.
On higher viscosity products, the average deviation in accuracy will be less.
*Stated accuracy obtainable when all variables remain constant. Reading/measurements
reflect a minimum of one minute of flow at selected rate(s). All accuracy statements
based on metering safety solvent (aliphatic hydrocarbon), approximate viscosity 1 CPS.
On higher viscosity products, the average deviation in accuracy will be less.
Construction :
Meter housing and rotors : Cast aluminum or stainless steel
Internal components : Aluminum, Ni-Resist, stainless steel
Seal materials : UL recognized component: Buna-N, Viton®1, Teflon®1
Bearings : Carbon, Teflon, Ni-Resist 1Viton and Teflon are registered trademarks of
DuPont Corporation.
Meter housing and rotors : Cast aluminum or stainless steel
Internal components : Aluminum, Ni-Resist, stainless steel
Seal materials : UL recognized component: Buna-N, Viton®1, Teflon®1
Bearings : Carbon, Teflon, Ni-Resist 1Viton and Teflon are registered trademarks of
DuPont Corporation.
Kami menjual flowmeter LC Made in Usa dengan harga kompetitif dan bersaing untuk mendapat harga terbaik silahkan kunjungi website kami di www.duniaflowmeter.com atau contact person Leo hp. 082122792896 .
Komentar
Posting Komentar